This is how to remove mold in the bathroom with a steam cleaner
Mold in the bathroom is a common problem that not only causes serious concerns, but is also harmful to your health. In this article, we share effective tips to prevent and control mold, and offer a detailed step-by-step plan to remove mold and make sure it is less likely to return, namely with a steam cleaner. Read along?
Prevention is better than cure
First we need to understand how to prevent mold. If you don't understand this, then mold will always come back and you'll keep going on with mold removal. Below you will find some solutions that prevent mold from coming back.
Follow these steps to prevent mold:
1. Ventilate after every shower
One of the main factors contributing to mold is inadequate ventilation. Make sure you properly ventilate the bathroom after showering. Install a powerful exhaust fan and run it for sufficient time after showering or bathing to remove moisture. You can also choose to open the windows after showering.
2. Clean your bathroom regularly
Regular and thorough bathroom cleaning is essential. However, where many people go wrong is that they immediately use chemical agents. This is effective for a while, but does not remove the mold at the core. Therefore, always use a steam cleaner to remove mold in the bathroom. Hot steam will kill bacteria and mold and make it less likely to return. In addition, you don't have to use chemical agents which is a lot better for the environment.
3. Avoid standing water
Stagnant water is a breeding ground for mold. Therefore, after showering, always wipe the tiles with a squeegee and dry the shower stall. Repair leaking faucets and regularly check for damp spots under the sink and around the shower. Preventing standing water is a proactive measure to reduce mold growth.
4. Use antifungal paint
A smart preventive step is to paint the bathroom with mold-resistant paint. This paint provides an extra layer of protection and prevents mold from adhering to surfaces. Choose a quality antifungal paint for long-lasting protection.
5. Use natural air purifiers
consider placing natural air purifiers, such as air-purifying plants, in the bathroom. These plants not only help improve air quality, but also absorb moisture, which prevents the growth of mold.
This is how to remove mold in the bathroom:
The most effective solution against mold in the bathroom is a steam cleaner. The advanced steam technology, thanks to its high pressure, instantly eliminates bacteria and mold in the bathroom. In addition, the steam cleans the grout and tiles making your bathroom instantly look like new. Want to know how to use a steam cleaner most effectively to remove mold? Then proceed as follows:
Not a steam cleaner in the house yet? The Techweise NV286 steam cleaner is an advanced steam cleaner with special brushes that can combat mold.
- Make sure the bathroom is well ventilated.
- Wear protective clothing, gloves and a mask to protect yourself from mold spores.
- Fill the steam cleaner with water according to the instructions.
- Choose a small brush and attach it to the device.
- Let the steam cleaner get well warm.
- Direct the steam cleaner at the surface to be cleaned and slowly move back and forth over the mold.
- Work from top to bottom to prevent mold spores from spreading.
- For stubborn mold stains, repeat steam cleaning and use a hard brush for additional cleaning.
- Is the mold too stubborn? Then you can always use some fungal remover in combination with steam.
- Dry cleaned surfaces thoroughly with a clean cloth:
- Make sure there is continuous ventilation to remove residual moisture.
- Apply antifungal paint to previously affected areas.
- Follow the preventive tips mentioned earlier to prevent recurrence.
Conclusion to remove mold in the bathroom
By following these effective tips and using the Techweise NV286 steam cleaner , you can not only effectively fight mold in the bathroom, but also prevent it. Keep your bathroom clean, well-ventilated and protected from mold for a healthy living environment. Make sure you dry your bathroom well after showering and schedule regular cleanings. That's the way to eliminate mold in the bathroom!